This Kit may be used to monitor the temperature of both running and standing water, as well as the surface of pipes and tanks that form part of a water system.
Current law concerning Legionella water temperature testing, as defined in the revised Approved Code of Practice (ACOP) issued by the Government's Health and Safety Executive (HSE),states that it is the responsibility of all employers, who manage premises with hot/cold water systems and/or a wet cooling systems, to prevent Legionella contamination and to prevent or control its spread.
This kit from TME is designed to help prevent the spread of the Legionnaires type of bacteria. Generally, Legionella bacteria start to multiply in water at temperatures between 20 to 45°C (with the spread increased by the presence of nutrients such as rust, algae, sludge and scale). To control this, water should typically be kept cold below 20°C while hot water should be stored above 60°C and distributed at 50°C.
The MM2000 features an high accuracy microprocessor and is has a built in self calibrating function. Covering a temperature range of -200º to 1300º C combined with an Accuracy@23ºC ±0.15% of reading (subject to probe) this thermometer comes highly recommended!
• MM2000 Digital Single Input Thermocouple Thermometer
• TM03 Immersion temperature probe
• TS07 Surface temperature probe
• TA01 Fine wire probe
• 20 x TAPS Thermocouple Attachment Pads
• Carry Case (LEGC01)
• TEMPRB Temperature Log Book
• Legionella Booklet
• Seven thermocouple types
• °C/°F selectable
• Waterproof Thermometer
• Self-calibrating (* Applies to MM2000 unit only - not unit with probe attached!)
The TME MM2000 thermometer incorporates an easy to use standard thermocouple connector, allowing a wide range of interchangeable probes to be used. TME offers an extensive range of interchangeable thermocouple probes for this model.