TME CLEGK1-K Legionnaires Temperature Kit Integral Timer & Dual Probe + Calibration Certificate

TME CLEGK1-K Legionnaires Temperature Kit Integral Timer & Dual Probe

*Traceable Calibration Certificate dated on the day of order and showing results against specified points of +0°C,  50°C & +80°C

Description

CLEGK1 - MM2008 Handheld Digital Thermometer with Integral Timer and BSKS01-S Budget Dual Surface/Immersion Probe. An ideal kit for water temperature testing to aid legionella prevention.

Features

Handheld

• Integral Timer for 1 and 2 minute countdown

• Measurement Range: -200 to 1,372°C (probe dependant)

• Single Input Thermocouple

• High Accuracy +/-0.1% of Reading +/-0.2°C

• IP67 waterproof casing

• C/F Selectable

• Selectable Thermocouple Types: K & T

• Low Battery Indication

• Self-Calibrating

• Rubber Boot included for extra protection against damage

• Thermometer can be used with other 2-pin K or T Type Thermocouple Probes

Probe

• K Type Thermocouple Class I (±1.5°C ±0.25%)

• Measurement Range: -50 to + 250°C

• Measures 10mm by 110mm

• Dual Purpose for liquid and surface temperature measurement

• Ribbon band sensor sealed with Silicon Rubber compound to ensure the probe is fully waterproof.

• Cable Length is 1m of straight polyurethane with moulded connector

Contents

MM2008 – Legionella Thermometer with Integral Water Temperature Timer

BSKS01-S – Budget K Type Dual Probe

1 x PP3 Battery

Note: This probe only requires light pressure to give a true reading and is suitable for smooth, clean surfaces.

If used on an uneven surface, there is a risk that the band will be weakened and deformed.

Traceable Calibration Certificate

This unit is shipped with a Traceable Calibration Certificate dated on the day of order and showing results against specified points.

The calibration is carried out to National Standards using UKAS Accredited Laboratory Certificated Equipment. This gives the Certificate a traceability route right back to the national laboratory.

Our calibrations on this unit are done using a Julabo Calibration Bath and a UKAS Accredited Laboratory Calibrated Lab Facility Tempmaster Reference Thermometer.

NB Check with your inspector if unsure if a Traceable  Certificate meets your business requirements.