The RFAX100J Diligence WiFi (Thermistor) Air Probe is a damped air probe for use with the RF312-TP Diligence WiFi Temperature Data Logger. The probe is connected to a 1.0m lead.
Name | Value |
---|---|
Lead Length | 1.0m |
Connector Type | 3.5mm Jack Plug |
Sensor Type | PST (Thermistor) |
Stem Length | 30mm |
Stem Diameter | 8mm |
Temperature Range | -40°C to +70°C / -40°F - 158°F |
System Accuracy with Comark Thermometers | ±0.5°C -20°C to +70°C / ±0.9°F -4°F to +158°F |
Wire Type | Flat-Twin |
Lead Material | PVA |
Warranty | 6 Months |
Name | Value |
---|---|
Lead Length | 1.0m |
Connector Type | 3.5mm Jack Plug |
Sensor Type | PST (Thermistor) |
Stem Length | 30mm |
Stem Diameter | 8mm |
Temperature Range | -40°C to +70°C / -40°F - 158°F |
Wire Type | Flat-Twin |
Lead Material | PVA |
It is fair to say, that any probe that can measure temperature, could be used as an Air Probe, with varying degrees of success. However, Air Probes are specifically designed for this purpose and so have a higher degree of accuracy and response.
Air Probes are often designed to be very quick response with a low thermal mass. The sensor is designed to be as small as possible so that the air temperature is transferred to the probe with minimal temperature loss or gain to maintain a high degree of accuracy.
That said, all Comark Air Probes for the RF312-TP Diligence WiFi Temperature Data Logger are inherently designed to be slow. Why is this? Read on to find out….
We supply a Damped Air Probe style for the RF312-TP Diligence WiFi Temperature Data Logger, which comes in the form of a small stainless steel bullet shaped end, see picture.